Connecting To External Speakers Or Headphones - Philips NeoPix Easy NPX440 User Manual

Resolution
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
WXGA 1280 x 768
HD 1280 x 720
FULL HD 1920 x 1080
3 Press to display the input source list,
and then select VGA.
Connecting to external
speakers or headphones
Connect external speakers or headphones to
the projector. With this connection, audio from
the projector is played through the external
speakers or headphones.
DANGER!
Danger of hearing damage!
Before connecting the headphones,
turn down the volume on the projector.
Do not use the projector over a longer
time at high volume – especially when
using headphones. This could lead to
hearing damage.
1 Using a 3.5 mm audio cable, connect the
connector on the projector to the analogue
audio input (3.5 mm jack, or red and white
jacks) on the external speakers. Or connect
the connector on the projector to
headphones.
• The speakers of the projector are
deactivated automatically when the
external speakers or headphones
are connected to the projector.
Connect to playback devices
Image
refresh rate
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
2
AV MICRO SD
When connecting to the headphones, use
the volume control on the remote control to
adjust the volume to a comfortable level.
HDMI USB DC
11