Connecting To External Speakers Or Headphones; Placement Options - Philips PicoPix Micro+ User Manual

Table of Contents

Advertisement

Connecting to external
speakers or headphones
Connect external speakers or headphones to
the projector. With this connection, audio from
the projector is played through the external
speakers or headphones.
DANGER!
Danger of hearing damage!
Before connecting the headphones,
turn down the volume on the projector.
Do not use the projector over a longer
time at high volume – especially when
using headphones. This could lead to
hearing damage.
1
Using a 3.5 mm audio cable, connect the
connector on the projector to the analogue
audio input (3.5 mm jack, or red and white
jacks) on the external speakers. Or connect
the
connector on the projector to
headphones.
The speakers of the projector are
deactivated automatically when the
external speakers or headphones are
connected to the projector.
USB
2
When connecting to the headphones, press
/
to adjust the volume to a comfortable
level.
10
HDMI

Placement options

You can install the projector in the following
configurations. Follow the guidelines below for
different projector placement.
Notice
For overhead mounting on ceiling,
purchase a projector mount
recommended by an installation
professional and follow the instructions
that come with the mount.
Before mounting on the ceiling, make
sure the ceiling can support the weight
of the projector and mounting kit.
For ceiling installation, this product
must be securely attached to the ceiling
in accordance with the installation
instructions. An improper ceiling
installation may result in accident, injury
or damage.
Front table
1
Place the projector on a table in front of the
projection screen. This is the most common
way to position the projector for quick
setup and portability.
2
To adjust projection to the correct position,
when the projector is turned on, press
the projector to access the settings menu,
then navigate to select Proj. Direc. - Front
proj., then press OK.
Front ceiling
1
Mount the projector on the ceiling with
upside up in front of the projection screen.
A projector mount is required to mount the
projector on ceiling.
on
Philips · PicoPix Micro
+

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ppx325Ppx325/int

Table of Contents