Specifications - Hydrofarm Autopilot APCTART Instruction Manual

analog clock as a reference.
What if there is no power? Ensure the unit is getting power. Check the device that is connected to
the unit by plugging it directly into a known power supply. If the unit will not turn on and no LEDs will
illuminate, contact your distributor for repair and warranty issues.
The timer is turning on and off only some of the time, or ALL of the time? Verify that you have
selected the correct timer mode. (DAY Mode versus NIGHT Mode) Depending on what timer mode is
selected, the timer will work when the photocell is activated by the available light level. Ensure enough
light (or darkness) is present to change the status of the photocell from night to day status.
INSTRUCTIONS

SPECIFICATIONS

Input Voltage
Maximum Amperage
On Time Range
Off Time Range
Timing Accuracy
Timing Repeatability
Weight
Dimensions
120V
15A @ 120 VAC
1 second to 40 minutes
1 minute to 8 hours
+/- 10% of fixed scale
+/- 3%
<1lb
3" x 5" x 3.5"
3