Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hydrofarm Autopilot APC8200
Summary of Contents for Hydrofarm Autopilot APC8200
- Page 1 U S E R M A N UA L D I G I TA L CO CO N T R O L L E R APC8200...
- Page 2 APC8200 - USER MANUAL OVERVIEW Thank you for purchasing the Autopilot APC8200 Digital CO Controller! Our products are packaged and shipped with the utmost care. In the unlikely event that your item is incorrect, incomplete, or unsatisfactory, please contact us and we will resolve the issue.
- Page 3 LCD DISPLAY 1. CO Chart 2. Max Reading of Chart 3. Min Reading of Chart 4. Audible Alarm On/Off 5. CO Zone value (deadband setting) 6. CO Center value (Ideal CO2 level) 7. CO Reading 8. Zoom Level of Time – indicates the chart’s timespan 9.
- Page 4 MAX/MIN At the top right corner of the display, there are two numerical indicators: Max (2) and Min (3). As the Zoom Level is changed, the Max and Min values will reflect the maximum and minimum values on the chart of the selected parameter. At startup, the unit will automatically display values for 1d (day) value. AUTO DETECT DAY/NIGHT The built-in photocell sensor can automatically detect whether it is Day or Night.
- Page 5 LED DISPLAY MAIN MENU FUNCTIONS The Main Menu functions can be toggled POWER through by selecting the MENU button. If the DAY TIME main menu is not selected, the menu LED will remain off, leaving the UP buttons to toggle OUTPUT Zoom Levels, respectively.
- Page 6 Hydrofarm and the manufacturer assume no responsibility for any damage or loss suffered by the user or any third party arising through the use of this product or its malfunction.
- Page 7 NOTES...
- Page 8 Hydrofarm’s warranty liability extends only to the replacement cost of the product. Hydrofarm will not be liable for any consequential, indirect, or incidental damages of any kind, including lost revenues, lost profits, or other losses in connection with the product. Some states do not allow limitation on how long an implied warranty lasts or the exclusion of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
Need help?
Do you have a question about the Autopilot APC8200 and is the answer not in the manual?
Questions and answers
On the APC8200 After recalibration it would show ppm. But after unplugging over night it would read 0
The Hydrofarm Autopilot APC8200 may read 0 ppm after being unplugged overnight because it requires a warm-up time of less than 30 seconds after being powered on. During this period, the sensor may not yet be fully operational, leading to an initial reading of 0 ppm.
This answer is automatically generated
@Mr. Anderson
Still after a few minutes it was still reading 0