Sonnen eco 8.2 Setup Instructions
  1. Manuals
  2. Brands
  3. Sonnen Manuals
  4. Storage
  5. sonnenBatterie eco 8.2
  6. Setup instructions
Sonnen eco 8.2 Setup Instructions

Sonnen eco 8.2 Setup Instructions

Z-wave control
Hide thumbs Also See for eco 8.2:
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

Sonnen eco 8.2
Z-Wave Control

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the eco 8.2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Sonnen eco 8.2

Summary of Contents for Sonnen eco 8.2

  • Page 1 Sonnen eco 8.2 Z-Wave Control...
  • Page 2 Operating temperature: 0 C to 40 C . » Relative humidity: 8% to 80%. » Operating distance: Up to 100 feet/30 metres indoors or300 feet/100 metres outdoors. » AC Input: 230V 50Hz Max 10A » Operating Frequency: 921.42MHz 16.06.2017 sonnen Australia Pty Ltd...
  • Page 3 8.2 Z-Wave Control The Smart Switch 6 is a low-cost Z-Wave plug-in module specifically used to enable Z-Wave command and control (on/off) of any plug-in tool. It can report immediate wattage consumption or kWh energy usage over a period of time. In the event of power failure, non-volatile memory retains all programmed information relating to the unit’s operating status.
  • Page 4 8.2 Z-Wave Control Once the USB has been inserted into the PLC, plug a Z-Wave Smart Switch 6 Socket into a wall outlet within 3 meters from the sonnen eco8.2 unit. Via the Smartphone App select the ‘Smart-Plugs’ setting to proceed.
  • Page 5 8.2 Z-Wave Control 16.06.2017 sonnen Australia Pty Ltd...
  • Page 6 8.2 Z-Wave Control The device will then pair with the sonnen unit and you will be prompted to name the socket from a list of exiting name or set your own. You will then be able to set the surplus modes and auto or manual parameters.
  • Page 7 8.2 Z-Wave Control At some stage you may wish to reset all of your Smart Switch’s settings to their factory defaults. To do this, press and hold the Action Button for 20 seconds and then release it. Your Smart Switch will now be reset to...

Table of Contents