Stihl RMI 632 P Instruction Manual page 133

1. Main menu
2. Lock iMow
3. Switch on automatic mowing/Switch off
automatic mowing
4. Drive to docking station
5. Manual mowing
6. Start mowing
7. Start time-delayed mowing
8. Skip next active time
9. Edge mowing
1. Main menu:
OK takes you back to the main
menu.
2. Lock iMow:
Activate the disabling device.
Press the illustrated button
combination to unlock. ( 5.2)
3. Switch on automatic
mowing/
Switch off automatic mowing:
When automatic mowing is
switched on, the text "Automatic switched
on" appears in the status screen and the
automatic symbol is displayed next to the
battery symbol in the menus. The robotic
mower mows the mowing area fully
automatically.
When automatic mowing is switched
off, the text "Automatic switched off"
appears in the status screen and the active
times are shown as inactive (greyed out) in
the mowing plan. The mowing area is not
mown automatically. Mowing operations
can be initiated via the commands "Start
mowing" or "Start time-delayed mowing".
0478 131 9942 C - EN
RMI 632 C, RMI 632 PC:
Automatic mowing can also be
switched on and off using the app.
The robotic mower returns to the
docking station when automatic
mowing is switched off using the
app. ( 10.)
4. Drive to docking station:
The robotic mower travels back
to the docking station and
charges the battery. If automatic
mowing is switched on, the robotic mower
will mow the mowing area again at the next
possible active time.
RMI 632 C, RMI 632 PC:
The robotic mower can also be sent
back to the docking station using
the app. ( 10.)
5. Manual mowing:
Manual lawn mowing.
For safety reasons, the mowing
blade can only be activated if the
OK button is pressed and held and the
Mow button is then pressed. Steering is
performed using the control pad. (
6. Start mowing:
The robotic mower starts the
mowing operation automatically
following activation. The end of
the mowing operation must be specified.
If a secondary area was installed, after
pressing the OK button it is necessary to
define whether mowing is taking place on
a secondary area or on the main area.
( 12.10)
The standard setting for the duration of the
mowing operation can be modified under
"Mowing time" in the machine settings.
( 11.10)
In the main menu (
the command "Start mowing"
can also be activated by
pressing the Mow button.
If an external docking station with a
corridor was installed, bring the
robotic mower to the mowing area
before activation of the command
"Start mowing".
RMI 632 C, RMI 632 PC:
"Mowing start" can also be
activated in the app. (
7. Start time-delayed mowing:
The robotic mower starts the
mowing operation automatically,
but with a time delay, following
activation. The start and end times of the
mowing operation must be specified.
If a secondary area was installed, after
pressing the OK button it is necessary to
define whether mowing is taking place on
a secondary area or on the main area.
( 12.10)
The standard settings for the duration of
the mowing operation and for the delay
15.6)
can be changed in the machine settings
under "Mowing time" and "Delay".
( 11.10)
If an external docking station with a
corridor was installed, bring the
robotic mower to the mowing area
before activation of the command
"Start time-delayed mowing".
8. Skip next active time:
This command can be used if the
robotic mower is not to be
operated during the next active
time (e.g. in the case of a garden party).
Following confirmation, no mowing will
take place during the next active time.
Active times which have been cancelled in
this manner are greyed out in the mowing
plan. They can be released for mowing
11.4),
10.)
131