Lexus RC 350 AWD 2019 Owner's Manual page 309

3
Connect a positive jumper cable clamp to
clamp on the other end of the positive cable to
connect a negative cable clamp to
clamp at the other end of the negative cable to
 RC350/RC300 AWD
Positive (+) battery terminal (your vehicle)
A
Positive (+) battery terminal (second vehicle)
B
Negative (-) battery terminal (second vehicle)
C
Solid, stationary, unpainted metallic point away from the battery and any mov-
D
ing parts as shown in the illustration
 RC300
Positive (+) battery terminal (your vehicle)
A
Positive (+) battery terminal (second vehicle)
B
Negative (-) battery terminal (second vehicle)
C
Solid, stationary, unpainted metallic point away from the battery and any mov-
D
ing parts as shown in the illustration
4
Start the engine of the second vehi-
cle. Increase the engine speed
slightly and maintain at that level for
approximately 5 minutes to
RC350AWD_RC350_RC300AWD_RC30
0_OM_(U)_1810
7-2. Steps to take in an emergency
on your vehicle and connect the
A
on the second vehicle. Then,
B
on the second vehicle and connect the
C
.
D
recharge the battery of your vehi-
cle.
307
7