304
7-2. Steps to take in an emergency
If the electronic key does not
operate properly
If communication between the
electronic key and vehicle is inter-
rupted (P.94) or the electronic
key cannot be used because the
battery is depleted, the smart
access system with push-button
start and wireless remote control
cannot be used. In such cases, the
doors and trunk can be opened and
the engine can be started by follow-
ing the procedure below.
When the electronic key does not work
■
properly
●
Make sure that the smart access system
with push-button start has not been deac-
tivated in the customization setting. If it is
off, turn the function on.
Check if battery-saving mode is set. If it is
●
set, cancel the function. (P.94)
NOTICE
In case of a smart access system with
■
push-button start malfunction or
other key-related problems
Take your vehicle with all the electronic
keys provided with your vehicle, includ-
ing the card key, to your Lexus dealer.
Locking and unlocking the doors
and opening the trunk
Unlocking the door
■
Use the mechanical key (P.82) in
order to perform the following opera-
tions:
RC350AWD_RC350_RC300AWD_RC30
0_OM_(U)_1810
1
Insert the mechanical key while
pulling on the driver's door handle.
2
Unlocking the door.
3
Remove the key, return the handle,
and then pull the handle again.
Locking the door
■
1
Move the inside lock button to the
lock position.
2
Close the door.
Opening the trunk
■
Turn the mechanical key clockwise to
open. (P.58)