paint when removed.
2
Using a flathead screwdriver,
remove the cover.
To prevent scratching the vehicle, wrap the
tip of the flathead screwdriver with a cloth,
etc.
3
Remove the 2 screws.
RC350AWD_RC350_RC300AWD_RC30
0_OM_(U)_1810
6-3. Do-it-yourself maintenance
4
Pull the light unit toward the rear of
the vehicle to remove it.
5
Turn the bulb base counterclock-
wise.
6
Remove the light bulb.
7
Install a new light bulb then install
the bulb base to the light unit by
inserting it and turning the bulb
base clockwise.
After installing the light bulb, turn on the
rear turn signal light to visually check that
271
6