CONCORD Quartz Instruction Manual page 10

Important
Quick date setting:
as for all mechanical watches equipped with a calendar, the quick date
setting (crown in position I) MUST NEVER be carried out between 9pm
and 3am.
Water-resistance:
once the time/date setting is finished, you must screw the crown back
again in order to guarantee perfect water-resistance. To do this, push the
crown in to position 0 and turn it in a clockwise direction.
It is recommended that the crown and pushers not be handled under
water.
18 18 16
A
0 I
B
Intermediate or interval timing
Start: press push-button A to start running the chronograph.
Display interval time: press push-button B once. Timing continues in the
background.
Making up the measured time: press push-button B again.
Stop: press push-button A to stop the chronograph.
Back to zero: press push-button B (the chronograph counter will be reset
to its zero position).
Use of the chronograph
The measurement is carried out in
hours, minutes and seconds.
Push button A:
1st press: sets off the time
II
measurement.
2nd press: stops the time
measurement.
3rd press: restarts the time
measurement.
Push button B: single press, resets
the chronograph to zero (use when
the chronograph has stopped).
17 19 19