Contents; Getting Started - Clearaudio smart power 12V User Manual

User manual / Bedienungsanleitung

1. Contents

Please check all contents of your package:
smart power 12V
1.
2. 19V wall mount power supply
3. User manual
4. Warranty card / Quality card

2. Getting started

The Clearaudio smart power 12V
is delivered in custom-designed packaging. Please keep this
packaging to ensure safe transportation if needed.
Unpack the unit and place it at its desired location.
smart power 12V
Connect the to the mains power supply with the supplied 19V wall mount power
smart power 12V
supply. Then connect your turntable to the using the attached power cord, instead
of the usual power supply.
Note: Never connect the 19V power supply direct to your concept series turntable.
Serious damage can occur.
smart power 12V
Before using it is important to fully charge internal battery to bring it
to the optimum operating condition (see page 5, point 3.3, "Charging mode").
smart power 12V
To switch the on, use the switch on the rear side of the unit.
smart power 12V
The is now in the output/off mode, the LED ring of the button on the front will
brighten up and vanish after a few seconds.
Press the taster shortly, to activate the unit and to supply the turntable with power.
© clearaudio electronic GmbH, 2019-09
4