A space is reserved for a 3.5" floppy disk drive in the device bay.
Follow the procedures below to install a 3.5" floppy disk drive.
1. Fasten one pair of the FDD mounting brackets to both sides of a
3.5" floppy disk drive.
2. Unfasten and remove the upper cover plate of the MIC-3033/5.
3. Fasten the mounting brackets with the floppy disk drive on the
MIC-3033/5.
4. Connect the cables to the installed device and to the CompactPCI
rear transition board.
5. Close the upper cover.