Advertisement
Before operating your system, first check your power supply source.
Adjust the switch on the power supply to the correct voltage.
Two mounting flanges are included for users who would like to install
the MIC-3033/5 on a 19" rack.
The device bay of the MIC-3033/5 accepts four devices, including
three 3.5" devices and one slim-type CD-ROM drive.
There are three types of mounting brackets shipped with the MIC-
3033/5. The HDD mounting bracket is designed for mounting 3.5" hard
disk drives, one pair of mounting brackets are for a standard 3.5"
floppy disk drive, and one pair of mounting brackets are for a slim-type
CD-ROM drive. Please refer to Figure 2-4, 2-5, and 2-6 for an illustra-
tion of mounting. Figure 2-7 shows the recommended device bay
configuration.
Advertisement
