10. INSTALLING THE FLUE
ducts using the accessory splitting kit.
WARNINGS
C53
C63 The pressure drop of the ducts must not exceed 100 Pa
be used.
"SECTION" D
10.1 CONCENTRIC DUCTS
•
•
•
"SECTION" D at the end of this manual).
10.2 SEPARATE DUCTS
For special installations of the fumes inlet/outlet ducts, the
single splitting kit (C), supplied as an accessory, can be used.
This accessory, in fact, can be used to move the inlet and outlet
in any direction. This type of installation makes it possible to
discharge exhaust fumes both outside the building and into
mm). For further information, read the assembly instructions
outlet ducts, adapting them to various requirements. It can
•
•
•
31
7651556.01 (1-01/16)