1. COMMISSIONING THE BOILER
•
•
•
• Select the required heating mode (section 1.2).
DHW temperature adjustment
(+ to increase the temperature and – to decrease it)
(+ to increase the temperature and – to decrease it)
Boiler operating information
Operating mode:
Off – Reset – Exit menu/functions
Off: heating and DHW disabled
(only boiler anti-freeze protection is active)
Fault preventing the burner from lighting
Technical Service Centre call-in
Manually resettable fault (
Fault in progress
1.1 ADJUSTING THE CH AND DHW FLOW TEMPERATURE
Press
and
HEATING
When connected to an External Sensor,
DHW
1.2 OPERATING MODES
SYMBOL
OPERATING MODE
DISPLAYED
DHW
DHW & HEATING
HEATING ONLY
)
.
To enable the appliance in DHW -
and choose one of the three available modes.
enabled, press
for at least 3 seconds. Just the symbol
27
Burner lit
DHW operating mode enabled
Heating mode enabled
Programming menu
Boiler information menu
Set unit of measurement (SI/US)
and the heating delivery
and the primary boiler circuit
or
press
7651556.01 (1-01/16)
repeatedly
appears on the