IKA HS 260 basic Operating Instructions Manual page 25

3106600c_HSKS260_052006:HS-KS 260 b-c 13.04.10 14:32 Seite 25
HS/KS260 0305
a.) All display elements in the digital displays are activated for
about 2 seconds.
b.) The device type (left display) and operating mode (right dis-
play) are displayed for about 2 seconds.
2 6 0
K S
c.) IThe set time target value (for example 3:58) is displayed with
the indication h min and SV .The set (or stored) upper speed
limit from operating mode A is displayed with SAFE and OK for
about 2 seconds. The display upper speed limit cannot be modi-
fied by pressing and turning the turn button.
2 3 0
S A F E
O K
d.) The new speed target value that has been set or just stored
in the left display (for example 130) from operating mode A or B
is then shown with the unit 1/min and flashing SV .
I 3 0
I
/
m i n
SV
e.) by pressing the left or right turn button, you can place the agi-
tator in operation. the speed and time values are then shown in
large format on the display. In addition, the text PV is shown
on the display instead of SV .
The actual value of the time setting must be understood from
this point onward as the time remaining for the agitation pro-
cess. If the time remaining has reached zero, the agitator stops
its motion.
I 3 0
C
Switching the operation mode:
4
The following steps are required to switch the operating mode:
a.) Turn off the device with the power switch.
b.) Hold down both turn buttons and turn on the device with
the power switch. After about 1 second, you can let go of
the turn buttons.
c.) It is not possible to switch between operating modes A, B
and C in any order.
3 5 8 :
Instead, you can only switch by repeating the steps above
A - step a.) + b.) >B - step a.) + b.) >C - step a.) + b.) >A -
i
step a.) + b.) >
n m i n
4
SV
Setting the audio time expiration signal
The following steps are required to
activate the audio time expiration signal:
a.) Turn off the device with the power
switch.
3 5 8 :
b.) Hold down the right turn button
and turn on the device with the
i
n m i n
power switch. Let go of the turn
button after about 5 seconds.
4
SV
c.) You can activate (SOUND ON) or
deactivate (SOUND OFF) the
3 5 6 .
3 5 8 :
I 3 0
I
/ i
m i n n m i n
PV
PV
SV
SV
SV
4
25