Almando Control App; Main Page - almando Multiplay Surround Decoder Installation And Operating Instructions Manual

ALMANDO CONTROL APP

Main Page

The main page of the App is divided into four sections:
At the top there are three buttons. Use
the left to go to the General Settings,
the middle to the Speaker Settings,
and the right to close the App.
In the area below, all available inputs
are listed in the order of their priority.
The currently active input is shown in
color and can
separately by clicking on the gear
symbol. If several inputs are active at
the same time, the upper priority takes
precedence.
Below is a section that shows the type
of the signal as well as the status of
the Dolby Pro Logic. If Pro Logic is
active, a bar with buttons for the
different modes is displayed. The
mode can be selected separately for
each input (for example, MOVIE
MODE for HDMI and MUSIC MODE
for DIN).
At the bottom there is the volume
control and the MUTE button to mute
the unit. However, this range is only
available for certain inputs (see the
notes on the
settings).
be configured
respective input
15