For example:
If 'D&I Remote alarms' are to be sent as remote alarms through the main
multiplexer link, set:
will result in a MINOR alarm being generated locally when any remote alarm
is active.
In this way, D&I remote alarms may be carried on through the main link, so that
connected peripheral equipment can cause alarms to be carried transparently through
the main link.
Link BER High
Shows FAULT if the Bit Error Rate exceeds the threshold set. With an error free link,
this fault will eventually clear when the BER becomes less than the threshold set.
D&I Remote alarms
at the remote site.
At the local site, setting:
Remote Alarm
Echo 2 Mbps Multiplexer
: MAJOR
: MINOR
TECHNICAL: 0118 931 2233
21