Table of Contents
Advertisement
Echo 2 Mbps Multiplexer
Setting the System's Real-Time Clock
To change the system clock time, position the > cursor at the "Set Clock" field. The message
'Enter time and date (hh-mm-ss dd/mm/yy)' will appear at the bottom of the screen. The
time should be entered following the format shown. Time updates may be entered without a
date, but to change the date, both must be entered.
Viewing the Statistics pages
The Statistics pages give regularly updated information as to the performance of the E1 data
link(s).
It is important to note that there are in fact four statistics pages available for viewing:
m)
n)
o)
p)
These pages are accessed by moving the cursor to the 'Statistics :' field, using the spacebar to
select either the main link or the D&I link (if fitted). The local and remote pages are
accessed in the normal manner (using the spacebar on the 'Configuration' field).
=============================== 09:45 25/11/96 ==================================
Main Link (EUR) :
Idle Bandwidth
Clock Reference :
Configuration
Error Counts: >Period End-----BVC------BER-------CRC------FEBE-------FAS------SYNC
=================================================================================
(S)tart, (E)nd, (^R)eset current, <- / -> = scroll
16
SALES: 0118 965 5100
Local Main Link
Local D&I Link (if fitted)
Remote Main Link
Remote D&I Link (if fitted)
SYNCHRONISED
Mode
:
NORMAL
Framing
:
CRC4
:
1984K
INTERNAL
:
LOCAL
14:33:00
2902 8.9E-06
14:48:00
0
15:03:00
0
15:18:00
0
15:33:00
0
Current:
15:36:40
0
Cursor Keys to move, CTRL-U to save, ESC to abandon
2 MEGABIT E1 MULTIPLEXER
Nx64 Channels
: 4
D&I Channels
: NOT FITTED
System Alarms
: None
* Statistics
: Main Link
Events
: Log
506
362
94
<1E-09
0
0
0
<1E-09
0
0
0
<1E-09
0
0
0
<1E-09
0
0
0
<1E-09
0
0
0
V1.01
2
0
0
0
0
0
Advertisement
Table of Contents
