General Set-Up Display Layout; General Keyboard Conventions - Black Box Echo Series User Manual

General Set-Up Display Layout

There are three main areas on the supervisor set-up screen used to change parameters for the
Echo:
Nx64 channels.

General Keyboard Conventions

Only a few keys are required to configure the Echo multiplexer and are summarised as
follows:
→ (Right arrow)
← (Left arrow)
↑ (Up arrow)
↓ (Down arrow)
+ (Plus) or <SPACEBAR>
- (Minus)
<ENTER> or <RETURN>
<CTRL> and U
<ESC>
Moves the cursor to the next field to the right.
Moves the cursor to the next field to the left.
Moves the cursor to the next field upwards.
Moves the cursor to the next field downwards.
Toggles the parameter value up to the next available setting.
Toggles the parameter value down to the next available setting.
Accepts the current display page (else same as ↓).
Accepts all changes and causes multiplexer re-configuration.
Abandons all changes since last <CTRL> and U.
TECHNICAL: 0118 931 2233
Echo 2 Mbps Multiplexer
Upper left -
System parameters (Mode,
Clock Ref, Carrier, Idle
Bandwidth, and Configure etc.).
Upper right -
Other display pages which may
be selected, (Statistics etc.).
Bottom -
Channel configuration.
The initial display is that for the
11