Cf Card/ Hdd Player Software Description - Speco DVR-IP4CF User Manual

10. CF Card/ HDD Player Software
Description
PC Player Software
System Requirement
※ OS (Operating System) Windows 2000/ XP or later.
※ Use your PC to install DirectX (version DirectX 7.0 or above).
※ Using remote control software, please setup the resolution to 1024x768 or above.
Hardware Requirement
※CPU 1.0 GHz or higher.
※RAM 256 Mbyte or higher.
1. Installation
A. Hardware Installation
Make sure that HDD or CF card is connected through IDE or USB interface to the
PC.
B. Software Installation
1. During installation, you will need a desktop or laptop computer that meets these
minimum requirements: Windows 2000 or XP.
2. Copy the PC Player Software to your PC (under any directory, e.g.: C:\ ). When
user start-up PC Player Software, it will auto create a directory "_config", the
purpose is to store all parameter setup supplied by the PC Player Software.
2. Operation
Move the cursor to PC Player Software and double left mouse click to proceed.
When proceeding PC Player Software, it auto-detects the CF card or HDD (about 1
min. to auto detect, and may differ depending on file size).
※ Network DVR does not support player software other then PC Player software.
56
DVR-IP4CF