Sensor Type - Speco DVR-IP4CF User Manual

to trigger the alarm when hard disk is full (this setup is only active when the
system is under record status).
9. BUZZER TIME: Press《ENTER》 button to setup the buzzer time to continuous
(CONT), and press any button to release this setup.
10. RELAY OUT TIME: Press《ENTER》button to setup the relay out time to
continuous (CONT), and press any button to release this setup.

8.5.1 SENSOR TYPE:

1. Cursor (>) position indicates the current selected position.
2. Press 《 ←》 and 《 →》 button to move the cursor to the desired item (CH1~CH4).
3. Press《ENTER》button to make changes.
4. Press《MENU》button to exit "SENSOR SETUP" selection.
5. CHANNEL-1: Press《ENTER》button to setup "NO" (Normal Open) or
"NC" (Normal Close).
6. CHANNEL-2 ~ CHANNEL-4: Please follow the setup shown above (CHANNEL-1).
SENSOR SETUP
> CHANNEL-1
CHANNEL-2
CHANNEL-3
CHANNEL-4
PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT
NOT INSTALLED
NOT INSTALLED
NOT INSTALLED
NOT INSTALLED
28
■■■
DVR-IP4CF