Assembly Dimensions - IMKO SONO-VARIO Xtreme User Manual

3.2. Assembly Dimensions

SONO-VARIO can either be installed at the base or the side wall of containers. One fact to
consider is that the installation into the container base also enables the measurement of smaller
material quantities. A mounting flange is available for SONO-VARIO. The flange can both be
welded on to the base and the side wall of the container. The probe can be adjusted to the
correct position, respectively correct installation height.
SONO-VARIO
Standard
SONO-VARIO
Xtrem
33/44
:
and VARIO
LD