Table of Contents
Advertisement
3-8. Setup – Network Mode
Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select
NETWORK icon and press SEL button to enter the setup menu item. Navigate through the menu items
using the control button (
▲ ▶ ▼
). To return to setup menu screen, press the ESC button
Item
PORT
WEB PORT
NETWORK TYPE
DHCP
▼
) and SEL button. Enter the current password and select OK. Enter
the new password and select OK. Enter the same password again to
confirm and select OK. Then the message "PASSWORD CHANGED"
is displayed.
The factory default password is 1111.
◀ ▲ ▶ ▼
) and change the value of the menu item using the control button (
Figure 3.8.1. NETWORK Setup Screen
Table 3.8.1. Menu Items in Network Setup Screen
Port number (Default: 5445)
Web Sever Port number
Select a type of network connection. Options are:
DHCP and STATIC
Note. Other parts of the network setup screen change depending on
what network type you select.
DVR automatically get IP varying from time to time from network and
does not therefore need to be set.
Description
28
◀
Advertisement
Table of Contents
