3-9. Setup - CONFIG Mode
Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select
CONFIG icon and press SEL button to enter the setup menu item. Navigate through the menu items using
◀ ▲ ▶ ▼
the control button (
▼
). To return to setup menu screen, press the ESC button
Item
SAVE SETUP
TO A USB
LOAD SETUP
FROM A USB
LOAD
DEFAULT
LOAD
FACTORY
DEFAULT
) and change the value of the menu item using the control button (
Figure 3.9.1. Config Setup Screen
Table 3.9.1. Config Setup
User can save the current configuration (Setting values) of DVR to the USB
flash drive. Put the USB stick on the front panel and press SEL to start the
saving process.
User can upload the configuration of DVR to another DVR using the USB
Flash drive. Put the USB stick on the front panel and press SEL to start the
loading process.
Select ON to reset the system to the default settings.
(The follow settings such as Language, DVR ID, Security User
Authentication, Security User P/W, Date format, DLS settings, Network
settings, HDD serial number, and HDD ERROR time will not be included.)
Select ON to reset the system to the factory default settings.
Description
31
◀ ▲ ▶