Setup - Network Mode - Speco D4VT User Manual

NAME
COVERT
COLOR TUNING
MAIN OUTPUT
RESOLUTION
SUB MONITOR
OUTPUT
4-6. Setup – NETWORK Mode
Select the NETWORK tab. Then, the network menu is displayed as pictured below. Navigate through the
menu items or change the settings using the mouse or the remote control.
Item
NETWORK TYPE
IP
SUBNET MASK
GATEWAY
mouse or the remote control.
Select a channel to apply the following settings using the mouse.
Set the channel name. Press the right square button and set the channel
name and select OK.
The name can be made up to 36 characters.
Enable/disable display of the specified video channel in live display.
Control the brightness, contrast, hue and saturation.
Select video output resolution
Support 1920 X 1080, 1280 X 720
Select Sub Monitor Video out.
CVBS or SPOT
Figure 4.6.1. NETWORK Setup Screen
Table 4.6.1. Menu Items in NETWORK Setup Screen
DHCP: DVR will automatically retrieve an IP address.
STATIC: Network information must be manually configured.
Enter IP address that is assigned for the DVR
Enter Subnet Mask that is assigned for the DVR
Enter Gateway that is assigned for the DVR.
Description
36