ABB RED615 Applications Manual page 54

Section 3
RED615 standard configurations
PDNSPTOC1_OPERATE
NSPTOC1_OPERATE
NSPTOC2_OPERATE
CBXCBR1_SELECTED
X110_BI3_GAS_PRESSURE_ALARM
GUID-963EDA28-A80A-4E12-A265-9804FB4429EA V1 EN
Figure 23: Autorecloser function
PHIPTOC1_OPERATE
PHHPTOC1_OPERATE
PHHPTOC2_OPERATE
PHLPTOC1_OPERATE
NSPTOC1_OPERATE
NSPTOC2_OPERATE
T1PTTR1_OPERATE
PDNSPTOC1_OPERATE
EFIPTOC1_OPERATE
EFLPTOC1_OPERATE
EFLPTOC2_OPERATE
LNPLDF1_OPERATE
X110_BI1_EXT_CCBRBRF_START
EFHPTOC1_OPERATE
T2PTTR1_OPERATE
GUID-BB2026F5-5E42-4C55-9C9A-9E01E5046659 V1 EN
Figure 24: Circuit breaker failure protection function
48
LNPLDF_LS_OPERATE
PHIPTOC1_OPERATE
PHHPTOC2_OPERATE
PHHPTOC1_OPERATE
EFLPTOC1_OPERATE
EFHPTOC1_OPERATE
X120_BI3_CB_OPENED
X110_BI4_CB_SPRING_CHARGED
OR6
B1
B2
B3
B4
B5
B6
Circuit breaker failure protection CCBRBRF1 is initiated via the START input by a
number of different protection functions available in the protection relay as well as
externally by binary input X110:BI1. The circuit breaker failure protection function
offers different operating modes associated with the circuit breaker position and the
measured phase and residual currents.
The circuit breaker failure protection function has two operating outputs: TRRET and
TRBU. The TRRET operate output is used for retripping its own breaker through
TRPPTRC2_TRIP. The TRBU output is used to give a backup trip to the breaker
feeding upstream. For this purpose, the TRBU operate output signal is connected to the
binary output X100:PO2.
OR6
B1 O
B2
B3
B4
B5
B6
O:49|T:2.5|I:22
OR6
B1 O
B2
B3
B4
B5
B6
O:50|T:2.5|I:16
OR6
B1 O
B2
B3
B4
B5
B6
O:48|T:2.5|I:25
The operate signals from the protection functions are connected to the two trip logics:
TRPPTRC1 and TRPPTRC2. The output of these trip logic functions is available at
binary output X100:PO3 and X100:PO4. The trip logic functions are provided with a
DARREC1
INIT_1
INIT_2
INIT_3
INIT_4
INIT_5
INIT_6
DEL_INIT_2
DEL_INIT_3
DEL_INIT_4
BLK_RECL_T
BLK_RCLM_T
BLK_THERM
CB_POS
CB_READY
INC_SHOTP
INHIBIT_RECL
RECL_ON
SYNC
O
OR6
B1 O
B2
B3
B4
B5
B6
O:51|T:2.5|I:14
X120_BI2_CB_CLOSED
1MRS758127 C
OPEN_CB
DARREC1_OPEN_CB
CLOSE_CB
DARREC1_CLOSE_CB
CMD_WAIT
INPRO
DARREC1_INPRO
LOCKED
PROT_CRD
UNSUC_RECL
DARREC1_UNSUC_RECL
AR_ON
READY
ACTIVE
CCBRBRF1
BLOCK CB_FAULT_AL
START TRBU
POSCLOSE TRRET
CB_FAULT
O:52|T:2.5|I:1
Application Manual
CCBRBRF1_TRBU
CCBRBRF1_TRRET
RED615