Technical Data - BMW Saloon 3 Series Owner's Handbook Manual

REFERENCE

Technical data

Vehicle equipment
This chapter describes all standard, country-spe‐
cific and special equipment available for the
model series. It may therefore describe equip‐
ment and functions which are not installed in
General
The technical data and specifications in the
Owner's Handbook are reference figures. The
vehicle-specific data can deviate from this, for
example, due to selected special equipment,
country variants or country-specific measure‐
ment methods. Detailed values can be found in
the permit documents, on information plates on
Dimensions
Dimensions can vary depending on the model
version, equipment or country-specific measure‐
ment method.
The heights specified do not take into account
add-on parts such as a roof aerial, roof railing or
BMW 3 Series Saloon
Width with mirrors
Width without mirrors
Height
Length
Wheelbase
Smallest turning circle dia.
400
Technical data
your vehicle, for example on account of the op‐
tional equipment selected or the country variant.
This also applies to safety-relevant functions and
systems. Please comply with the relevant laws
and regulations when using the corresponding
functions and systems.
the vehicle or can be requested from a Service
Partner of the manufacturer or another qualified
Service Partner or a specialist workshop.
The information in the vehicle documents always
takes precedence over the information in the
Owner's Handbook.
spoiler. The heights can deviate, for example,
due to selected special equipment, tyres, loads
and suspension design.
mm (in)
mm (in)
mm (in)
mm (in)
mm (in)
m (ft)
Online Edition for Part no. xxx - VI/19
2068 (81.4)
1827 (71.9)
1435-1445 (56.5-56.9)
4709-4713 (185.4-185.6)
2851 (112.2)
11.4-12.0 (37.4-39.4)