Table of Contents
Advertisement
If the tyre inflation pressure of at least 2 bar is
not reached, contact a Service Partner of the
manufacturer or a qualified Service Partner or
a specialist workshop.
If the tyre inflation pressure of at least 2 bar is
reached, see Minimum tyre inflation pressure
is reached.
6.
Unscrew the connecting hose of the com‐
pressor from the tyre valve.
7.
Unplug the connector from the socket in the
vehicle interior.
8.
Store Mobility System in the vehicle.
Minimum tyre inflation pressure is
reached
1.
Unscrew the connecting hose of the com‐
pressor from the tyre valve.
2.
Unplug the connector from the socket in the
vehicle interior.
3.
Store Mobility System in the vehicle.
4.
Immediately drive for approximately
10 km/5 mi to evenly distribute the sealing
compound in the tyre.
Do not exceed a speed of 80 km/h/50 mph.
If possible, do not drive slower than
20 km/h/12 mph.
Adjusting
1.
Stop in a suitable area.
2.
Screw the connecting hose of the compres‐
sor directly onto the tyre valve.
Wheels and tyres
Online Edition for Part no. xxx - VI/19
3.
Insert the plug into the socket in the vehicle
interior.
4.
Correct tyre inflation pressure to at least
2.0 bar:
▷
To increase tyre inflation pressure: switch
on the compressor with standby state
switched on or the engine running.
▷
To reduce tyre inflation pressure: press
the button on the compressor.
5.
Unscrew the connecting hose of the com‐
pressor from the tyre valve.
6.
Unplug the connector from the socket in the
vehicle interior.
7.
Store Mobility System in the vehicle.
Resuming with journey
Do not exceed maximum permitted speed of
80 km/h, 50 mph.
Reinitialise the runflat indicator RPA, see
page 353.
Reset the Tyre Pressure Monitor TPM, see
page 346.
Have the punctured tyre and the sealant con‐
tainer of the Mobility System replaced as soon as
possible.
MOBILITY
345
Hide quick links:
Advertisement
Table of Contents
