BMW Saloon 3 Series Owner's Handbook Manual page 241

▷ If Dynamic Traction Control DTC is activated
or Dynamic Stability Control DSC deactiva‐
ted.
▷ If Dynamic Stability Control DSC intervenes.
▷ If the vehicle is stationary and the seat belt is
unfastened and the driver's door is opened.
▷ If the system has not detected any objects for
an extended period of time, for example on
roads with little traffic and without defined
boundaries.
▷ If the detection zone of the radar is disrupted,
for example due to contamination or heavy
rainfall.
▷ After an extended stationary period, if the ve‐
hicle was decelerated to a standstill by the
system.
To set the speed
Maintaining and saving the speed
While the system is interrupted, press the rocker
switch up or down once. The system is activa‐
ted.
The current speed is maintained and stored as
the desired speed.
The stored speed is displayed on the speedom‐
eter.
Dynamic Stability Control DSC is switched on, if
necessary.
The speed can also be stored by pressing the
button.
Press the button.
Driver Assistance Systems
Online Edition for Part no. xxx - VI/19
Changing the speed
Press the rocker switch repeatedly up or down
until the desired speed is set.
If the system is active, the displayed speed is
stored and the vehicle adjusts to the stored
speed when the road is clear.
▷ Each time the rocker switch is pressed to the
resistance point, the desired speed is in‐
creased or decreased by 1 km/h, 1 mph.
▷ Each time the rocker switch is pressed be‐
yond the resistance point, the desired speed
changes to the next multiple of 10 km/h on
the km/h display or the next multiple of 5 mph
on the mph display in the speedometer.
To repeat an action, hold the rocker switch in the
relevant position.
Setting the distance
General
The distance setting is saved for the current
driver profile.
Safety note
WARNING
The system does not relieve you of your per‐
sonal responsibility. System limitations may
mean that braking is performed too late. There
is a danger of accidents or damage to property.
Pay close attention to the traffic conditions at
all times. Adapt the distance to traffic and
CONTROLS
241