MOBILITY
General
▷
Please observe the notes on the application
of the Mobility System which are on the com‐
pressor and the sealant container.
▷
Applying the Mobility System can be ineffec‐
tive for tyre damage larger than approximately
4 mm.
▷
Contact a Service Partner of the manufac‐
turer or another qualified Service Partner or a
specialist workshop if you are unable to put
the tyre back in operation.
▷
Foreign bodies that have penetrated the tyre
should remain inside the tyre. Only remove
foreign objects if they are visibly protruding
from the tyre.
▷
Remove the speed limit sticker from the seal‐
ant container and attach to the steering
wheel.
▷
Using sealants can damage the TPM wheel
electronics. In this case, have the electronics
replaced at the next opportunity.
▷
The compressor can be used to check the
tyre inflation pressure.
Overview
Storage
The Mobility System is located in a bag in the left
storage compartment of the boot. To remove it,
loosen the tensioning strap.
342
Wheels and tyres
Sealant container
▷
▷
Note the use-by date on the sealant container.
Compressor
1 Unlocking sealant container
2 Sealant container holder
3 Tyre inflation pressure indicator
4 Reduce tyre inflation pressure button
5 On/Off button
6 Compressor
7 Plug/cable for socket
8 Connecting hose
Safety measures
▷
▷
▷
Online Edition for Part no. xxx - VI/19
Sealant container, arrow 1.
Filler hose, arrow 2.
Park the vehicle on a firm surface and as far
away from moving traffic as possible.
Switch on the hazard warning lights.
Apply the parking brake to prevent the vehi‐
cle rolling away.