BMW Saloon 3 Series Owner's Handbook Manual page 261

3. ▷
"Parking guide lines".
Driving path lines and turning circle lines
are shown.
▷ "Obstacle mark.".
Depending on the equipment, the obsta‐
cles detected by Park Distance Control
PDC are displayed by markings.
1. If necessary, tilt the Controller to the left.
2. "Tow hitch".
A zoomed-in image of the trailer tow hitch is
displayed.
Parking guidance lines
Driving path lines
The driving path lines help you to estimate the
space required when parking and manoeuvring
on a level road surface.
The driving path lines are dependent on the
steering angle and are continuously adapted to
the steering wheel movements.
Driver Assistance Systems
Online Edition for Part no. xxx - VI/19
Turning circle lines
The turning circle lines can only be shown in the
camera image together with driving path lines.
The turning circle lines show the trajectory of the
smallest possible turning circle on a level road
surface.
Once the steering wheel has been turned be‐
yond a certain angle, only one turning circle line
is displayed.
Parking with the help of driving path and
turning circle lines
1. Position the vehicle so that the red turning
circle line is within the boundaries of the park‐
ing space.
2. Turn the steering wheel so that the green
driving path line covers the corresponding
turning circle line.
Obstacle marker
Depending on the equipment, obstacles behind
the vehicle are detected by the Park Distance
Control PDC sensors.
Obstacle markers can be shown in the image
from the rear-view camera.
CONTROLS
261