Troubleshooting Ipv6 Basics Configuration - H3C S5500-SI Series Operation Manual

Operation Manual – IPv6
H3C S5500-SI Series Ethernet Switches
bytes=56 Sequence=5 hop limit=255
--- 2001::20F:E2FF:FE00:1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 40/58/70 ms
[SwitchA-Vlan-interface2] ping ipv6 3001::2
PING 3001::2 : 56
Reply from 3001::2
bytes=56 Sequence=1 hop limit=255
Reply from 3001::2
bytes=56 Sequence=2 hop limit=255
Reply from 3001::2
bytes=56 Sequence=3 hop limit=255
Reply from 3001::2
bytes=56 Sequence=4 hop limit=255
Reply from 3001::2
bytes=56 Sequence=5 hop limit=255
--- 3001::2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 50/60/70 ms

1.11 Troubleshooting IPv6 Basics Configuration

I. Symptom
The peer IPv6 address cannot be pinged.
II. Solution
Use the display current-configuration command in any view or the display this
command in system view to check that the IPv6 packet forwarding function is
enabled.
Use the display ipv6 interface command in any view to check that the IPv6
address of the interface is correct and that the interface is up.
Use the debugging ipv6 packet command in user view to enable the debugging
for IPv6 packets and make judgment according to the debugging information.
time = 60 ms
data bytes, press CTRL_C to break
time = 50 ms
time = 60 ms
time = 60 ms
time = 70 ms
time = 60 ms
1-28
Chapter 1 IPv6 Basics Configuration