H3C S5500-SI Series Operation Manual page 25

Operation Manual – IPv6
H3C S5500-SI Series Ethernet Switches
Display the total number of
neighbor entries satisfying the
specified conditions
Display the PMTU information
of an IPv6 address
Display information related to
a specified socket
Display the statistics of IPv6
packets and ICMPv6 packets
Display the IPv6 TCP
connection statistics
Display the IPv6 TCP
connection status
Display the IPv6 UDP
connection statistics
Clear IPv6 dynamic domain
name cache information
Clear IPv6 neighbor
information
Clear the corresponding
PMTU
Clear the statistics of IPv6 and
ICMPv6 packets
Clear all IPv6 TCP connection
statistics
Clear the statistics of all IPv6
UDP packets
Note:
The display dns domain command is the same as the one of IPv4 DNS. For details
about the commands, refer to DNS Commands.
To do...
Chapter 1 IPv6 Basics Configuration
Use the command...
display ipv6 neighbors { all |
dynamic | interface interface-type
interface-number | static | vlan
vlan-id } count
display ipv6 pathmtu
{ ipv6-address | all | dynamic |
static }
display ipv6 socket [ socktype
socket-type ] [ task-id socket-id ]
display ipv6 statistics
display tcp ipv6 statistics
display tcp ipv6 status
display udp ipv6 statistics
reset dns ipv6 dynamic-host
reset ipv6 neighbors { all |
dynamic | interface interface-type
interface-number | static }
reset ipv6 pathmtu { all | static |
dynamic}
reset ipv6 statistics
reset tcp ipv6 statistics
reset udp ipv6 statistics
1-24
Remarks
Available in
any view
Available in
user view