H3C S5500-SI Series Operation Manual page 31

Operation Manual – IPv6
H3C S5500-SI Series Ethernet Switches
Enter system view
Enable the IPv6 packet forwarding
function
Enter interface view
Configure an IPv4 address for the
interface
Configure
an IPv6
address
on the
interface
To do...
Manually
Configure
specify an
IPv6
IPv6 address
global
unicast
address or
Configure an
local
IPv6 address
address
in the EUI-64
format
Automatically
create an
IPv6 link-local
address
Configure
IPv6
link-local
Manually
address
specify an
IPv6 link-local
address
2-2
Chapter 2 Dual Stack Configuration
Use the command...
system-view
ipv6
interface
interface-type
interface-number
ip address ip-address
{ mask | mask-length }
[ sub ]
ipv6 address
{ ipv6-address
prefix-length |
ipv6-address/prefix-le
ngth }
ipv6 address
ipv6-address/prefix-le
ngth eui-64
ipv6 address auto
link-local
ipv6 address
ipv6-address
link-local
Remarks
—
Required
Disabled by
default.
—
Required
By default, no
IP address is
configured.
Use either
command.
By default, no
local address
or global
unicast
address is
configured on
an interface
Optional
By default,
after you
configured an
IPv6 local
address or
global unicast
address, a link
local address
is
automatically
created.