Table of Contents
Advertisement
-2- Choose Permanent if you want to set up
A screen similar to the following is displayed when you
choose Manual or Auto:
Adr
Pool Size
Msk
Lease Time
Setting up the Pool Size
The maximum number of IP addresses in the DHCP Pool
supported by
-1- From the DHCP Setup screen select Adr.
-2- Enter the first IP address to be used from the DHCP
-3- Select Pool Size and press ENTER.
-4- Enter the last IP address to be used from the DHCP
Issue 7 - 05/02
AuroraPresto
to allocate an unlimited lease.
Choose Leased if you want to set up
allocate a limited lease.
Use to set up the DHCP Pool IP
address range.
Use to set up the DHCP Pool IP
address range.
This is copied from the LAN Setup
menu. The IP Mask separates the
network address from the device
address.
See
Mask IP address
details on entering the Mask IP
address.
This option is only available when you
choose Leased.
AuroraPresto
Pool and press ENTER to accept the entry.
Pool and press ENTER to accept the entry.
Setting up AuroraPresto
Entering the Source IP address,
on page 3-18 for
is 10.
AuroraPresto
to
3-25
Advertisement
Table of Contents
