Table of Contents
Advertisement
AuroraPresto—User Guide
-2- Select PPP Layer and press ENTER to display the
Press F3 PPP to active or deactivate the PPP layer.
Press F2 Clear to clear all PPP Link States.
PPPoE Only Statistics
4-92
PPP Link State screen.
Variant—PPPoE Cli, PPPoE Svr, PPPoA Cli
•
PPPoA Svr or Bridged.
LCP—Link Control Protocol status.
•
IPCP—Displays the IPCP (Internet Protocol
•
Control Protocol) link status. Opened is
displayed when an IP address is allocated to
AuroraPresto
displayed if the origin has been set to a fixed IP
Address (Specify).
Tot RxPkt—The total number of PPP packets
•
received.
Tot TxPkt—The total number of PPP packets
•
transmitted.
Variant—PPPoE Cli or PPPoE Svr
•
Dis RxPkt—The total number of Discovery
•
Phase packets received.
Dis TxPkt—The total number of Discovery
•
Phase packets transmitted.
Ses RxPkt—The total number of Session Phase
•
packets received.
Ses TxPkt—The total number of Session Phase
•
packets transmitted.
AC Name—The name of the Access
•
Concentrator (Edge Router). (PPPoE Cli only)
from the network.Unused is
481801
Advertisement
Table of Contents
