Terminate Bluetooth Connection - Hama 113776 Operating Instructions Manual

Note – Bluetooth
• Some terminal devices require a password in order
to connect to another Bluetooth device.
• If your terminal device requests a password for
connection to the radio, enter 0000.
7. Bluetooth pairing via NFC
• Make sure that NFC is supported by your smartphone
and activated.
• Activate the Bluetooth mode by repeatedly pressing
[SOURCE] (2) on the SoundZbar.
• The status LED for the Bluetooth connection (10)
begins to flash blue.
• Touch the NFC interface (5) on the SoundZbar with
your smartphone.
• The status LED for the Bluetooth connection (10) is
now constantly lit blue.
• Start and control audio playback using the controls of
the terminal device.

8. Terminate Bluetooth connection

• Press and hold [PAIR] (4) for about 2 seconds to
terminate the Bluetooth connection to your terminal
device.
• The SoundZbar can now be connected to another
terminal device (see Section 5).
9. Connection via Auxiliary Input
You can use the AUX analogue audio input to connect
various terminal devices (for example, game console,
smartphone, tablet PC, MP3 player, etc.) as well as
older analogue sources (CD/DVD player etc.) to the
SoundZbar and play their audio signals using the
SoundZbar.
Note
• Switch off the SoundZbar before connecting a
terminal device.
• Do not bend or crush the cable.
• Connect your terminal device to the AUX socket (2)
on the SoundZbar using the included 3.5-mm audio
cable (jack cable).
• Press [POWER] (1) to switch on the SoundZbar.
• Activate the AUX mode by repeatedly pressing
[SOURCE] (2) on the SoundZbar.
• The status LED for the AUX mode (9) is constantly lit.
• Start and control audio playback using the controls of
the terminal device.
8
password
®
10. Connection via optical audio cable
You can use the SoundZbar's digital audio input to
connect your terminal device (for example, game
console, TV set, etc.) and play its audio signals using
the SoundZbar.
Note
• Switch off the SoundZbar before connecting a
terminal device.
• Remove the protective caps from both ends of the
optical signal cable before connection.
• Do not bend or crush the cable.
• Connect one end of the optical signal cable to the
optical audio input (1) on the SoundZbar, the other
end to the optical audio output on your terminal
device.
• Press [POWER] (1) to switch on the SoundZbar.
• Activate the OPT mode by repeatedly pressing
[SOURCE] (2) on the SoundZbar.
• The status LED for the OPT mode (8) is constantly lit.
• Start and control audio playback using the controls of
the terminal device.
11. Sound modes
You can choose between three different modes for the
playback of your audio signals:
Gaming mode activates more treble and bass for a
better gaming experience.
Music mode activates a linear frequency response for
powerful playback of a variety of music tracks.
Cinema mode activates an effect similar to surround
sound, and brings out every sound detail.
• Press [MODE] (3) repeatedly to select the various
sound modes.
• The Gaming mode status LED (11) is constantly lit if
Gaming mode was selected.
• The Music mode status LED (12) is constantly lit if
Music mode was selected.
• The Cinema mode status LED (13) is constantly lit if
Cinema mode was selected.