Table of Contents
Advertisement
7. Bluetooth
pairing
®
You can pair your devices with the loudspeaker using
Bluetooth and use this as a playback device for audio signals.
You can control playback directly on the terminal device. The
volume can also be controlled directly on the loudspeaker.
Note – Bluetooth
®
• Check whether your mobile device (smartphone, tablet
PC. etc.) is Bluetooth-capable.
• Note that the maximum range for Bluetooth
metres without obstacles such as walls, people, etc.
• The connection may be disrupted by other Bluetooth
devices/connections in the vicinity.
• The loudspeaker can only ever be paired with one
device at a time.
• Note that compatibility depends on the supported
Bluetooth
profiles as well as the Bluetooth
®
being used. (See: Technical data in the operating
instructions for the respective device)
• Ensure your Bluetooth-enabled device is switched on
and that Bluetooth is activated.
• Press and hold [Bluetooth] (2) for approximately
2 seconds to activate pairing mode.
• The status LED starts to flash blue and a signal tone
is heard.
• Open the Bluetooth settings on your device and wait
until the Hama SIRIUM1000ABT is shown in the list
of found Bluetooth devices.
• If necessary, start searching for Bluetooth devices on
your device.
• Select the Hama SIRIUM1000ABT loudspeaker in the
list of available devices and wait until the loudspeaker is
shown as connected in your device's Bluetooth settings.
• The Bluetooth status LED now lights up solid blue.
• Start and control audio playback using the controls on
your device.
Note – Bluetooth
password
®
Some devices require a password in order to connect to
another Bluetooth
device.
®
• If your device requests a password to connect to the
loudspeaker, enter 0000.
7.1 Automatic Bluetooth
(after successful pairing)
• Devices that have already been paired with the loudspeaker
are stored automatically on the loudspeaker.
Note - connection impaired
After the loudspeaker and device have been paired,
a connection is established automatically. If the
Bluetooth
check the following:
is 10
®
• Check the Bluetooth
whether SIRIUM1000ABT is connected. If not, repeat
®
the steps listed under Bluetooth
• Check that your device and the loudspeaker are
less than 10 metres apart. If not, move them closer
together.
• Check whether obstacles are impairing the range.
versions
®
If so, move the devices closer together.
7.2 Terminating the Bluetooth
• Change to a different mode to terminate the Bluetooth
connection between the loudspeaker and the device.
• Alternatively, you can terminate the connection manually
on your device.
8. Network streaming
The loudspeaker allows audio files stored on a PC, tablet
or smartphone to be played.
Note
• Please note that, depending on the source device
you are using, other software that allows streaming
may be required.
8.1 Playback from a computer (streaming)
You can manage the loudspeaker via your computer
and stream music to it from your computer.
Requirements:
• The loudspeaker and computer must be on the
same network.
• The loudspeaker must have been authorised as
a playback device on the computer.
7
connection
®
connection is not established automatically,
®
settings of your device to see
®
®
®
pairing.
connection
®
Advertisement
Table of Contents
