Hama Mini Drum - Mobile Speaker Operating Instructions

Table of Contents

Contents

1 Controls and Displays
2 Package Contents
3 Safety Notes
4 Getting Started and Operation
5 Warranty Disclaimer
6 Technical Data
7 Recycling Information
8 Declaration of Conformity
9 Documents / Resources
- 9.1 References
- 9.2 Download manual

Controls and Displays

Device - Overview

Microphone
Track - / Volume -
On/Off switch/Play/Pause
Track + / Volume +
LED indicator
Micro USB port
Audio input socket

Package Contents

"Mini Drum" Bluetooth^® smartphone speakers
1x USB charging cable
These operating instructions

Safety Notes

The product is intended for private, non-commercial use only.
Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
Do not use the product in areas where the use of electronic devices is not permitted.
Since the battery is integrated and cannot be removed, you will need to dispose of the product as a whole. Do this in compliance with the legal requirements.
Do not drop the product and do not expose it to any major shocks.
Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Do not open the device or continue to operate it if it becomes damaged.
Keep the packaging material out of the reach of children due to the risk of suffocation.
Be considerate. Loud volumes can have a detrimental effect on your surroundings.
Dispose of packaging material immediately according to locally applicable regulations.
Do not modify the product in any way. Doing so voids the warranty.
Keep this product, as all electrical products, out of the reach of children!

Getting Started and Operation

Turning on the product

Press and hold the on/off button (3) for approx. 3 seconds to turn on the speaker.
A voice notification confirms that the device is ready for operation. The LED indicator (5) flashes blue.

Turning off the product

Press and hold the on/off button (3) for approx. 3 seconds to turn off the speaker.
A voice notification confirms that the device is turning off. The LED indicator (5) goes out.

information Note – Automatic power off

Note that the speaker will automatically turn off after 10 minutes without action (no audio playback/no Bluetooth ® function). The corresponding signal tone sounds.

information Note

Common static discharges (from carpet, wool jumpers, etc.) can cause the product to switch to standby mode.
If the device no longer responds, press the on/ off switch to switch the device back on.

Audio playback via an audio cable (3.5- mm jack)

Ensure that the speaker is turned off.
Connect your mobile terminal device (MP3 player, smartphone, etc.) and the audio input (7) of the speaker using a 3.5-mm audio cable.
Set the volume on your terminal device to a low level.
Turn on the speaker as described in Switching on the product.
Start audio playback on the connected terminal device.
Music playback can be controlled from the speaker (if the connected device supports this function).
Press Play/Pause (3) to start or pause audio playback.
Briefly press Track + / Volume + (4) to skip to the next track.
Briefly press Track - / Volume - (2) to skip back to the previous track.
Press and hold Track - / Volume - (2) to reduce the volume.
Press and hold Track + / Volume + (4) to increase the volume.

information Note

Please note that you cannot establish the Bluetooth connection described below if an audio cable is connected.

Bluetooth^® pairing

Note

Check whether your mobile device (MP3 player, mobile phone, etc.) is Bluetooth ® -capable.
If not, then the speaker can only be used with an audio cable.
The functions described in this section are only available for Bluetooth ® -capable terminal devices.
Note that the max. range of Bluetooth ® without any obstacles such as walls, people, etc. is 10 metres.

Make sure that your Bluetooth ® -capable terminal device is on and Bluetooth ® is activated.
Make sure that your Bluetooth ® -capable terminal device is visible for other Bluetooth ® devices.
Make sure that the speaker is located within the Bluetooth ® range of max. 10 metres.
Turn on the speaker as described in 4.1 Turning on the product.
The speaker automatically searches for a connection.
Open the Bluetooth ® settings on your terminal device and wait until "Hama Mini Drum" appears in the list of Bluetooth ® devices found.
Select "Hama Mini Drum" and wait until you hear the speaker emit a voice notification and the speaker is listed as connected in the Bluetooth settings on your terminal device. The LED indicator (5) lights up steady blue.
Start and stop audio playback on your terminal device or using Play/Pause (3) on the speaker.
Alternatively, the music playback may be controlled from the speaker, as described in 4.3 Audio playback via an audio cable (3.5-mm jack).

information Note – Bluetooth ® password
Some devices require a password to connect to another Bluetooth ® device.

To connect to the loudspeaker, enter the password 0000 when prompted to enter from your terminal.

information Note – Impaired connection
After a successful initial connection of the loudspeaker and the terminal, the connection is made automatically. If the Bluetooth connection does not recover automatically, check the following:

In the Bluetooth ® settings of the terminal, check whether Hama Mini Drum is connected. If not, repeat the steps under Bluetooth initial connection.
Check that the equipment and the speakers are less than 10 meters apart. If not, reduce the distance of the devices.
Check whether obstacles affect range. If so, position the devices closer together.

Automatic Bluetooth^® connection (after successful pairing)

Make sure that your Bluetooth ® -capable terminal device is on and Bluetooth ® is activated.
Make sure that your Bluetooth ® -capable terminal device is visible for other Bluetooth ® devices.
Make sure that the speaker is located within the Bluetooth ® range of max. 10 metres.
Turn on the speaker as described in "Turning on the product".
The LED indicator (5) lights up steady blue.
Start and stop audio playback on your terminal device or using Play/Pause (3) on the speaker.
Alternatively, the music playback may be controlled from the speaker, as described in "Audio playback via an audio cable (3.5-mm jack)".

Hands-free function

You can use the speaker as a hands-free set for your mobile phone. For this function, the mobile phone must be connected to the speaker via Bluetooth ®.

Make sure that your mobile phone is connected to the Bluetooth ® speaker.
Press the on/off button (1) to accept the call.
Press the on/off button (1) once more to end the call.
Press the on/off button (1) twice in a row to reject an incoming call.
Press the on/off button (1) twice in a row to redial.

information Note – Call quality

To increase the call quality, make sure that you are near the speaker with your mobile phone during the call.

Battery charging function

Connect the included USB charging cable to the speaker's USB port (6).
If the battery level is less than 20%, an announcement will play once per minute. You will only receive this information if the speaker is on.
Connect the unused plug on the USB cable to an available USB port on your computer or another suitable USB terminal device.
The LED indicator (5) lights up red while charging is in progress. When the battery is fully charged, the red LED indicator (5) goes out.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/ or safety notes.

Technical Data

Frequency range:	20 Hz – 20 kHz
Output:	3 W
Battery type:	3.7V/Li-Po/300 mAh/1.11Wh
Charging voltage:	5V 300mA
Impedance:	4 Ω
Range:	< 10 m
Bluetooth^® technology:	Bluetooth^® v4.0 + HFP, HSP, A2DP, AVRCP

Recycling Information

Note on environmental protection:

After the implementation of theEuropean Directive 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electric and electronic devices as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country.
This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/batteries, you are making an important contribution to protecting our environment.

Declaration of Conformity

Hereby, Hama GmbH & Co KG declares that the radio equipment type [00173170, 00173171, 00173172, 00173173] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.hama.com -> 00173170, 00173171, 00173172, 00173173 -> Downloads.