3Com Baseline Switch 2900 Series Getting Started Manual page 58

Table 5-5 Description of the FTP parameters
Item
Load File Name :
Server IP Address :
Local IP Address :
Gateway IP Address :
FTP User Name
FTP User Password
Enter the file name and IP addresses based on the actual condition.
If the switch and the server are on the same network segment, you can specify any unused IP
address of the network for the switch without specifying the gateway's IP address; if they are not on
the same segment, you need to specify the gateway's IP address so that the switch can
communicate with the server.
6) Update the Boot ROM file on the switch
Enter the corresponding parameters based on the actual condition. The system displays the following
information:
Will you Update Basic BootRom? (Y/N):Y
The system asks you whether you want to update the basic Boot ROM section. Click Y. The system
displays the following information after the update is complete:
Updating Basic BootRom...........Done!
Updating extended BootRom? (Y/N):Y
The system asks you whether you want to update the extended Boot ROM section. Click Y and then the
system displays the following information after the update is complete:
Updating extended BootRom.........Done!
7) Restart the switch to make the updated Boot ROM file effective
Press any key to return to the Boot ROM update menu.
Press enter key when ready
1. Update full BootRom
2. Update extended BootRom
3. Update basic BootRom
0. Return to boot menu
Enter your choice(0-3):
Enter 0 to return to the Boot ROM menu, and then enter 0 again. After that, the device is restarted and
the updated Boot ROM file becomes effective.
Name of the file to be downloaded
IP address of the PC
IP address of the switch
IP address of the gateway
Username for logging in to the FTP server, which should be consistent
with that configured on the FTP server.
Password for logging in to the FTP server, which should be consistent
with that configured on the FTP server.
5-16
Description