Introduction To The Boot Rom Menu - 3Com Baseline Switch 2900 Series Getting Started Manual

Introduction to the Boot ROM Menu

Starting......
************************************************************************
*
*
*
************************************************************************
Creation Date
CPU Type
CPU L1 Cache
CPU Clock Speed
Memory Type
Memory Size
Flash Size
CPLD Version
PCB Version
Mac Address
Press Ctrl-B to enter Extended Boot menu...1
When the system displays "Press Ctrl-B to enter Extended Boot menu", press Ctrl + B. Then, the
following prompt is displayed:
Please input BootRom password:
By default, the system starts up in fast mode and the waiting time here is one second. If you set the
startup mode to normal, the waiting time is five seconds. For the setting of the startup mode, refer
to "Changing the Boot
To enter the Boot ROM menu in fast mode, you need to press Ctrl + B within one second when the
system displays "Press Ctrl-B to enter Boot Menu". Otherwise, the system starts decompressing
the application files.
You need to restart the switch if you want to enter the Boot ROM menu after the application files are
decompressed.
Enter the Boot ROM password (the initial password is null). Then the system displays the Boot ROM
menu.
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
3COM 2928-SFP Plus BOOTROM, Version 102
: Jan 8 2009
: ARM926
: 32KB
: 333MHz
: DDR2 SDRAM
: 128MB
: 128MB
: 001
: Ver.A
: 000ef2002900
Mode" on page 4-7.
5-2
*
*
*