3Com Baseline Switch 2900 Series Getting Started Manual page 41

Are you sure you want to change it to full startup mode? Yes or No (Y/N):
Enter Y. The system displays the following information:
Setting...Done!
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify BootRom password
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set BootRom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Enter 0. The system reboots in normal startup mode and displays the following information:
Starting......
************************************************************************
*
* 3COM 2928-SFP Plus BOOTROM, Version 102
*
************************************************************************
Creation Date
CPU Type
CPU L1 Cache
CPU Clock Speed
Memory Type
Memory Size
Flash Size
CPLD Version
PCB Version
Mac Address
Press Ctrl-B to enter Extended Boot menu...5
In normal startup mode, the waiting time here is five seconds. If you press Ctrl + B within five seconds,
the Boot ROM menu is displayed. If you perform no operation or press a key other than Ctrl + B within
five seconds, the system begins to automatically start up and the following information is displayed:
Starting to get the main application file--flash:/S2900-CMW520-A1101.bin!......
................................................................
The main application file is self-decompressing................................
...............................................................................
..............................Done!
System is starting...
Board checking..........................LS51LTSR
SDRAM fast selftest..........................OK!
Flash fast selftest..........................OK!
: Jan 8 2009
: ARM926
: 32KB
: 333MHz
: DDR2 SDRAM
: 128MB
: 128MB
: 001
: Ver.A
: 000ef2002900
4-8
*
*
*