Huawei SUN2000-30KTL-A User Manual page 60

SUN2000-(30KTL-A, 33KTL, 33KTL-E001, 40KTL)
User Manual
 The metal contacts supplied with the DC connectors are either cold forming contacts or
stamping forming contacts. Choose the crimping tools that fit the metal contact types. Do
not mix up the tools.

Crimp the metal cold forming contacts using crimping tool UTXTC0005 (Amphenol,
recommended) or H4TC0001 (Amphenol).
 Crimp the metal stamping forming contacts using crimping tool H4TC0003 (Amphenol,
recommended), H4TC0002 (Amphenol), PV-CZM-22100 (Staubli), or PV-CZM-19100
(Staubli). When choosing PV-CZM-22100 or PV-CZM-19100, do not use the locator.
Otherwise, metal contacts would be damaged.
Figure 5-18 Crimping tool (H4TC0003)
(1) Locator
Figure 5-19 Preparing positive and negative connectors (using metal cold forming contacts)
(1) Positive metal contact (cold forming)
(3) Positive connector
Issue 10 (2019-06-30) Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(2) Negative metal contact (cold forming)
(4) Negative connector
53