Huawei SUN2000-30KTL-A User Manual page 30

SUN2000-(30KTL-A, 33KTL, 33KTL-E001, 40KTL)
User Manual



Installation Environment Requirements


Carrier Requirements




Installation Mode Requirements


Issue 10 (2019-06-30)
The installation method and position must be appropriate for the weight and dimensions
of the SUN2000. For details, see
Do not install the SUN2000 in a place where personnel are easy to come into contact
with its chassis and heat sinks, because these parts are extremely hot during operation.
Do not install the SUN2000 in an area that stores flammable or explosive materials.
The SUN2000 must be installed in a well ventilated environment to ensure good heat
dissipation. When installed under direct sunlight, performance de-rate may be initiated
due to additional temperature rise.
To ensure the optimal operating status, the ambient temperature should be lower than
40° C.
The carrier where the SUN2000 is installed must be fire-proof.
Do not install the SUN2000 on flammable building materials.
Ensure that installation surface is solid enough to bear the SUN2000.
Do not install the SUN2000 on a wall made of gypsum boards or similar materials with
weak sound insulation to avoid noise disturbance in a residential area.
Install the SUN2000 vertically or at a maximum back tilt of 15 degrees to facilitate heat
dissipation.
Do not install the SUN2000 at a front tilt, excessive back tilt, side tilt, horizontally, or
upside down.
Copyright © Huawei Technologies Co., Ltd.
10 Technical Specifications.
4 Installation
23