SUN2000-(30KTL-A, 33KTL, 33KTL-E001, 40KTL)
User Manual
Figure 5-14 Connecting the SUN2000-30KTL-A or SUN2000-40KTL AC output cable
(including the ground cable)
Step 8 Use a torque wrench with an open end of 52 mm to tighten the locking cap to a torque of 7.5
N· m.
----End
Follow-up Procedure
Check that the cables are connected correctly and securely, and then seal the cable holes with
firestop putty.
5.4 Connecting DC Input Power Cables
Connect the SUN2000 to PV strings over DC input power cables.
Prerequisites
Issue 10 (2019-06-30)
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
49