Door Opening Limiters - Miele CVA 7440 Operating And Installation Instructions

Installation
 Open the machine door and loosely
fit the screws at either side.
 Carefully turn the lower screws to
centre the machine in the niche.
 Tighten both upper screws by hand
to secure the machine in the unit. Do
not overtighten them.
 Carry out a functional check on the
coffee machine.

Door opening limiters

The coffee machine door hinges are
equipped with door opening limiters
that restrict the opening angle of the
machine door to approx. 120°. This will
prevent the machine door from hitting
an adjacent wall and being damaged
when opened.
The door opening limiters can be
removed, allowing you to increase the
opening angle to approx. 170°. This
makes it easier to remove the bean
containers, for example.
84
Removing the door opening limiters
Make sure that sufficient space is
available for the larger door opening
angle and that the machine door is
not going to hit an adjacent wall.
 Remove the door opening limiters
from the hinges, e.g. by prising them
out with a screwdriver.
The machine door opening angle has
now been increased to approx. 170°.