Door Opening Limiters - Miele CVA 7440 Operating And Installation Instructions

Installation
Pushing in and aligning the coffee
machine
Take care not to trap or damage the
electrical connection when pushing
the appliance into the niche.
 Push the coffee machine all the way
into the niche until you feel some
resistance.
Never align the coffee machine by
adjusting the door hinges. This will
prevent the milk container from
attaching correctly and interfere with
the milk preparation process.
 Check the height of the coffee
machine to make sure that it is sitting
centrally in the niche and that it is
level. Align the appliance if
necessary.
You can now screw the coffee machine
to the cabinet.
Screwing the coffee machine to the
cabinet
 Open the appliance door.
2 TX20 (25 mm) screws are supplied
with the appliance.
86
 Secure the coffee machine to the side
walls of the cabinet using the screws
supplied.
 Tighten both screws by hand.
Tip: To make it easier to attach the
screw on the left, you can remove the
door opening limiters and increase the
door opening angle to approx. 170°
(see "Door opening limiters"). Make
sure that there is sufficient space
available and that the appliance door is
not going to hit an adjacent wall.
 Check that the coffee machine is
working correctly.

Door opening limiters

The coffee machine door hinges are
equipped with door opening limiters
that restrict the opening angle of the
machine door to approx. 120°. This will
prevent the machine door from hitting
an adjacent wall and being damaged
when opened.
The door opening limiters can be
removed, allowing you to increase the
opening angle to approx. 170°. This
makes it easier to remove the bean
containers, for example.