Degreasing The Brew Unit And Cleaning Inside - Miele CVA 7440 Operating And Installation Instructions

Cleaning the milk pipework
The milk pipework must be cleaned at
least once a week.
The Clean the milk pipework
programme lasts for
approx. 15 minutes.
The cleaning process cannot be
cancelled. It must be completed
through to the end.
 Touch the  sensor.
 Select
Clean the milk pipework
touch OK.
The process will start and various
messages will appear in the display.
 Follow the instructions in the display.
When
Fill water container with lukewarm
water and cleaning agent up to the cleaning
mark  and replace it. Close the door
appears in the display, proceed as
follows.
Preparing the cleaning solution
For optimal cleaning results, we
recommend Miele cleaning agent for
milk pipework.
The cleaning agent for milk pipework
has been specially developed for use
with Miele coffee machines and
prevents subsequent damage.
It is available to order via the Miele
webshop or directly from Miele (see the
end of this booklet for contact details).
 Add 2 sticks of the cleaning agent for
milk pipework to the water container.
maintenance
 Fill the water container to the
and
 Replace the water container in the
 Follow the instructions in the display.
 If prompted to do so in the display,
The cleaning process is complete when
the drinks menu appears.
Degreasing the brew unit and
cleaning inside
Depending on the natural oil content of
the coffee used, the brew unit can
become blocked quite quickly. It must
Cleaning and care
 mark with lukewarm water and stir
the solution.
Follow the instructions for the mixing
ratio carefully. Fill the water container
with the specified amount of water.
Otherwise, cleaning will be
incomplete.
coffee machine and close the
machine door.
rinse the water container thoroughly
with clean water. Make sure that no
cleaning agent is left in the water
container. Fill the water container with
tap water.
63