Miele CVA 7440 Operating And Installation Instructions page 76

Problem solving guide
Do not remove the connecting pieces
from the hoses.
 Press the retainers on the left and
right-hand sides of the milk valve
holder and pull the holder forwards to
remove it.
 Take the holder and silicone seal
apart.
76
 Pull the stainless steel bolt upwards
and out.
 Clean the individual components of
the milk valve in the dishwasher.
Tip: If there are any dry milk residues
on the front, soak the stainless steel
bolt in warm water and a little washing-
up liquid before placing it in the
dishwasher.
Fitting the milk valve
 Insert the stainless steel bolt from
above.
 Insert the silicone seal into the milk
valve holder.